#416 「Bass電池夾、線路整理」“Bass Battery Clip and Wiring Arrangement”
The original battery clip was not compatible with this Bass, so it was forcefully opened to accommodate two batteries. As a result, the batteries got damaged and would frequently fall out.
#415「安全地移除結他上弦枕」”Safely Removing the Guitar Nut”
Removing the nut is not difficult. What is difficult is removing the nut while protecting the guitar neck from damage.
#414「拾音器高度維修」“Pickup Height Repair”
The foam used for adjusting the pickup height has worn out due to long-term use and no longer performs its intended function. How can we solve this problem?
#413「黐琴橋嘅準備」“Preparation for Regluing the Bridge”
What preparations are there for regluing an acoustic guitar bridge?
#412「打磨琴橋」“Sanding the Bridge”
Sanding the bridge to lower the action is not complicated, but it requires attention to many details in the repair.
#411「升級你嘅木結他～下」“Acoustic Guitar Upgrade 101! 2nd part”
What else can you upgrade your acoustic guitar?
#410「升級木結他101～上」“Acoustic Guitar Upgrade 101! 1st part”
The two upcoming posts will be sharing the apprentice's own guitar and exploring the options for upgrading/modifying the acoustic guitar.
#409「CNC加工嘅Fender上弦枕」“Fender nut manufactured by CNC”
9.5” radius bottom nut made with precision,
Paired with a jig to sand the nut height,
Make adjusting a Fender electric guitar so much easier~
#408「Analysis Plus QiJACK優點」“Strengths of using Analysis Plus QiJACK”
What’s so special about Analysis Plus QiJACK?
#407「L.R. Baggs Anthem 系列分別」“L.R. Baggs Anthem Series Differences”
Do you familiar with the differences between the Anthem and SL?
#406「Ultra Tonic拾音器安裝工具」“A jig for installing The Ultra Tonic”
Due to the need for accurate alignment of the pickup directly below the saddle, we have created a tool based on the official instruction from James May Engineering to assist in the installation of the Ultra Tonic pickup.
#405「James May Engineering Ultra Tonic 拾音器」“James May Engineering Ultra Tonic Pickup”
To address multiple issues, James May Engineering has developed the Ultra Tonic, a passive pickup that incorporates an internal sensor to cancel feedback without excessively attenuating the midrange, thus preserving a warm and full sound.
#404「處理古董Martin結他下弦枕」下 “Dealing with Vintage Martin Glue-In Saddle” 2nd part
Continuing on from our last post, those familiar with Martin guitars may notice something unusual about this saddle.
#403「處理古董Martin結他下弦枕」上 “Dealing with Vintage Martin Glue-In Saddle” 1st part
Dealing with the action (height) of these saddles was more complicated than with normal saddles. Removing the saddles from the bridge posed a significant risk of damaging the guitar. Therefore, the only feasible method to lower the saddle was to sand its top.
#402「加裝琴橋螺絲」“Bridge Screws Add-On Modification”
To completely fix the problem of a loose guitar bridge, we did more than just regluing it. We added two screws to firmly hold the bridge in place on both the bridge itself and the top of the guitar.
#401「製琴師繩結」“Luthier’s Knot”
The “Luthier’s Knot” is a special method of stringing. Its principle involves tying the strings to the tuning pegs to prevent them from slipping out.
#400「重新黐實Lowden 琴橋」“Reglue Lowden Bridge”
With this perfectly fitted bridge clamp, the bridge can be securely glued in place more effectively than ever before.
#399「Phosphor Bronze Refret」“Phosphor Bronze Refret”
What comes to your mind when we mention Phosphor Bronze (PB)?
#398「Taylor電池盒改動」“Taylor’s battery box modification”
Taylor’s battery box used to be smaller before 2018, which may not fit various brands of 9V batteries.
#397「結他導線屏蔽改裝」“Shielding modification for guitar cable”
Apart from guitar repairs, we also provide guitar cable repair and customisation.