#876 結他維修隨筆：【 加裝 Ghost piezo 同 preamp 】
幫一支原本有十種音色嘅結他加裝 Ghost piezo 同 preamp，多埋自然 acoustic 音色。A Ghost piezo and preamp add natural acoustic tone to a guitar that already had 10 sounds.
#875 結他維修隨筆：【 Buzz Feiten Tuning System Setup 】
Buzz Feiten Tuning System Setup，更和諧自然嘅音色。Buzz Feiten setup for a purer, more natural tone.
#874 結他維修隨筆：【 Martin 全面翻新：Neck Reset 到 Refinish 】
Martin 全面翻新：Neck Reset 到 Refinish，期待成品。Rebuilding a Martin — neck reset through refinish.
#873 結他維修隨筆：【 Martin 00 12-fret Custom Wild Grain／裝 Pickup 】
Martin 00 12-fret Custom Wild Grain，今次裝 Pickup。Martin 00 12-fret Custom Wild Grain — pickup install.
#872 結他維修隨筆：【 DP420W＋DP155FWB／Split Coil 改裝 】
DP420W＋DP155FWB 加 split-coil，一支琴覆蓋清澈到爆發。DP420W + DP155FWB with split-coil — cleans to punchy drive.
#871 結他維修隨筆：【 複雜線路焊接嘅測試小秘技 】
複雜線路焊接途中不停測試嘅小秘技。A neat little trick for testing tricky wiring on the fly.
#870 結他維修隨筆：【 Fender Custom Shop 】
Fender Custom Shop 每一支都用好藝術嘅形式出現。Every Fender Custom Shop piece is a work of art.
#868 結他維修隨筆：【 精準擴大 Fret Slots 嘅小工具 】
精準擴大 fret slots 嘅小工具。The little tool for precisely widening fret slots.
#867 結他維修隨筆：【 Squier Vista Jagmaster 加 Split Coil 】
為 Squier Vista Jagmaster 嘅 humbucker 加 split 功能。Added split-coil to a Squier Vista Jagmaster.
#866 結他維修隨筆：【 Gibson ‘54 × Staple P90 】
安裝咗 Staple P90 嘅 Gibson 54。A Gibson ‘54 fitted with a Staple P-90.
#463「決定Fret嘅長度」“Determining the length of frets”
[EN] Creating ball-end frets requires extreme precision. We explain our measurement process. [中] 製作半圓球狀的 Fret 對長度精準度要求極高，本篇紀錄我們如何透過細微測量，確保演奏時完全不刮手。
#461「拾音器電線繞線器」“Pickup Wire Organiser”
[EN] Custom CNC tool to organize pickup wiring and reduce interference. [中] 我們利用 CNC 開發了專屬繞線器，有效管理過長電線，防止雜音與電磁干擾，提升輸出穩定度。
#460「填滿原裝Inlay窿 2」“Filling the Original Wooden Inlay Hole 2”
[EN] Using CNC technology and hide glue to restore a fretboard seamlessly. [中] 利用 CNC 技術配合傳統皮膠，製作同材質木栓進行無縫填補，是古董結他修復與指板翻新的關鍵紀錄。
#459「填滿原裝Inlay窿 1」“ Filling the Original Wooden Inlay Hole 1”
Picture 1: Clean the wood filler inside the fretboard's circular hole.
Picture 2: Based on the size of the hole, use a CNC machine to create cylindrical inlays from wood with the same diameter.
Picture 3: Mix wood dust into hide glue, matching the color of the fretboard. Then, use the hide glue to adhere the cylindrical wood inlays to the fretboard.
To be continued...
#458「點樣處理呢條結他頸好呢？」 “How should we treat this guitar neck?”
One fine day, we received the guitar neck shown in Image 1.
Well... How can we turn it into the finished product like in Image 2?
Do any of you have any ideas?
#457「幫自己嘅結他進行Refret」“Refretting my own guitar”
[EN] Why we recommend Phosphor Bronze frets for acoustic guitarists. [中] 為什麼我們推薦磷青銅品絲？本篇紀錄為個人木結他進行 Refret 的過程，分享其獨特的音色反饋與手感表現。